Panasonic AVHS300G - HD SWITCHER Operating Instructions Manual Download Page 60

Page: 60 / 64

Word

Explanation

SDI
[Serial Digital Interface]

The standard by which video signals in various SD and HD formats are
transmitted along a single coaxial cable.

Self Key

A function that creates key signals from key fill signals for combining keys.

Tally

The signal which outputs the program output statuses of the input signals to an
external device. The LED that indicates the program output status on the control
panel is also referred to as tally.

Transition

A function that switches from one image to another.
Wipe, mix and other effects are available for the images during switching.

Tri-level Sync

The sync signal used for HD formats.

Wipe

A video effect in which one image is gradually replaced by another as the
boundary between the two is moved using a preselected pattern.

Appendix (glossary)

Summary of Contents for AVHS300G - HD SWITCHER

































































Search results

Summary of Contents for AVHS300G - HD SWITCHER

Reviews:

Related manuals for AVHS300G - HD SWITCHER

Brands by name

Popular brands

Panasonic AVHS300G - HD SWITCHER, Operating Instructions Manual

Search results

Summary of Contents for AVHS300G - HD SWITCHER

Reviews:

Related manuals for AVHS300G - HD SWITCHER

Brands by name

Popular brands