Panasonic AVHS300G - HD SWITCHER Operating Instructions Manual Download Page 41

Page: 41 / 64

3. Setup

3-9. Status displays

The statuses can be displayed.

Press the [FUNC] switch to light its indicator, and then press the [SETUP] switch to display the SETUP

menu.

Turn [F1] to display the STATS menu.

ALM (alarm): Indicates a fan and/or power supply alarm.

FAN



Fan alarm

POWR



Power supply alarm

F, P



Fan alarm and power supply alarm



No alarm information

OPT (option): Indicates whether or not an optional board is provided.

ANLG



The HD analog board has been inserted.



The HD analog board has not been inserted.

VER (version): Indicates the software version.

1083

45"54

"-.

'"/

015

"/-(

7&3

3-10. Initialization

All the settings except the preset memory can be returned to the factory defaults.
(When they are returned, the images in the frame memory will also be initialized.)

Press the [FUNC] switch to light its indicator, and then press the [SETUP] switch to display the SETUP

menu.

Turn [F1] to display the INIT menu.

Press [F] to initialize the settings. The “INIT?” message appears.

To initialize the settings, turn [F] to select YES, and then press the [F] switch.

To cancel the initialization, turn [F] to select NO, and then press the [F] switch.

*/*5

&9&$

:&4

*/*5

Summary of Contents for AVHS300G - HD SWITCHER

































































Search results

Summary of Contents for AVHS300G - HD SWITCHER

Reviews:

Related manuals for AVHS300G - HD SWITCHER

Brands by name

Popular brands

Panasonic AVHS300G - HD SWITCHER, Operating Instructions Manual

Search results

Summary of Contents for AVHS300G - HD SWITCHER

Reviews:

Related manuals for AVHS300G - HD SWITCHER

Brands by name

Popular brands