3. Basic operations
STORE: This is used to store the panel settings in the preset memory.
1
Press the [FUNC] button to light its indicator, and press the [MEMORY] button to display the MEMORY
menu.
2
Turn [F1] to display the PSMEM sub menu.
3
Turn [F], select “Store” using the Mode item, turn [F3], and set the preset memory number using the
NO.Sel item.
4
Press the [F] switch (Exec) to store the settings.
<Menu display>
PSMEM
Mode
NO.Sel XPT
Exec↓
1/4
Store ■1 Disable
Recall
Clear
1-10 Enable
The “
” appears at the left of the number when data has been saved in the preset memory.
RECALL: This is used to recall the preset memory data and change the panel settings.
1
On the MEMORY menu, turn [F1] to display the PSMEM sub menu.
2
Turn [F], select “Recall” using the Mode item, turn [F3], and set the preset memory number using the
NO.Sel item.
3
Turn [F4] to select whether to call the crosspoint selection status using the XPT item.
Enable: The data stored in the preset memory is used.
Disable: The data stored in the preset memory is not used, and the settings prior to recall are retained.
4
Press the [F] switch (Exec) to recall the settings.
CLEAR: This is used to clear contents in the preset memory.
1
On the MEMORY menu, turn [F1] to display the PSMEM sub menu first.
2
Turn [F], select “Clear” using the Mode item, turn [F3], and set the preset memory number using the
NO.Sel item.
3
Press the [F] switch (Exec) to clear the content.
