manualshive.com logo in svg

Panasonic AK-HCU250P, Operating Manual

Share
Download
Panasonic AK-HCU250P Operating Manual Download Page 8

Introduction

- 8 -

Introduction

How to View This Manual

About trademarks and registered trademarks

 

● SDXC logo is a trademark of SD-3C and LLC.

 

● Other names of companies or products in this manual are either registered trademarks or trademarks of their respective owners.

About copyright

Distributing, copying, disassembling, reverse compiling, reverse engineering and also exporting in violation of export laws of the software 

provided with this unit are expressly prohibited.

Illustrations and screen displays featured in the manual

 

● What is shown in the manual’s illustrations and screen displays may differ from how it actually appears.

Abbreviations

The following abbreviations are used in this manual.

 

● The term memory card will be used below as a generic term for both SD, SDHC and SDXC memory cards. SD, SDHC or SDXC 

will be used in descriptions that refer to only one of the two card types.

 

● HD studio camera is referred to as a camera in this manual.

 

● Camera control unit is referred to as a CCU in this manual.

 

● Remote operation panel is referred to as an ROP in this manual.

 

● Master setup unit is referred to as an MSU in this manual.

For the purposes of this manual, the model numbers of the units are given as listed in the table below.

Model number of unit

Model number given in manual

AK-HC3900G

AK-HC3900

AK-HC3900GS
AK-HRP1000G

AK-HRP1000

AK-HRP1005G

AK-HRP1005

AK-HCU250P

AK-HCU250

AK-HCU250PS

AK-HCU250E

AK-HCU250ES
AK-MSU1000G

AK-MSU1000

Overview

This camera control unit (CCU) is designed to be used with the HD studio camera (AK-HC3900; sold separately).
Connect it to the HD studio camera (hereinafter referred to as the camera) with an optical fiber multi cable (sold separately).
You can use the unit to input and output the video signals of various formats.*

1

Equipped with 3G-HD/HD-SDI output, 3G/HD-SDI return input, prompter input (3G/HD-SDI, analog composite), and 3G/HD-SDI HD TRUNK 

OUT output.
Intercom calls with the camera and microphone audio output are possible.
The unit also comes with tally and other system interface inputs.
Connecting the ROP (AK-HRP250; sold separately, AK-HRP1000; sold separately, AK-HRP1005; sold separately) with a multi cable (sold 

separately) allows you to use the ROP to control the adjustment and setting of the camera and this unit.
*1: Configure the format and imaging mode settings on the camera according to the format setting of the CCU.

Summary of Contents for AK-HCU250P



































































Reviews:

No comments

Brands by name

Popular brands

Load more brands