Connection
-
16
-
Equipment connections
● Before proceeding with the connections, check that the power of the unit and camera is OFF.
● Use the optical fiber multi cable to connect the unit and camera.
Connect only the AK-HC3900 camera: Do not connect any other model.
● Use a dedicated cable to connect the unit to the ROP.
● When the unit’s [POWER] switch is set to ON and then the camera’s power is set to ON, the camera can be controlled using the
ROP.
● The camera statuses are shown on the picture monitor.
“Picture monitor displays” (see page 22)
When you configure the unit’s settings by menu operations, the menu screens are displayed on the picture monitor.
“Menu operations” (see page 35)
● Before disconnecting the cables from the camera and ROP, turn off the camera’s power and then turn off the unit’s power.
● When connecting the unit to the ROP using IP connection via a switching hub, use a switching hub that provides PoE support.
● When operating multiple ROPs at the same time with the unit connected using IP connection via a switching hub, the ROP
operated last will be given priority.
Camera: AK-HC3900
PoE-compatible
switching hub
Picture monitor (HD-SDI)
PROMPT
(Analog composite)
ROP :
AK-HRP250/
AK-HRP1000/
AK-HRP1005
RETURN
HD-SDI)
HD TRUNK
HD-SDI)
PROMPTER
HD-SDI)
HD SDI
