Picture monitor (PM)
-
23
-
Transition of displays
When trouble is detected, warning information is automatically displayed on the picture monitor.
Even if status information or operation information is already displayed on the picture monitor when trouble is detected, priority is given to
the display of the warning information.
The descending sequence of priority for the displays on the picture monitor is as follows: warning displays → auto displays → status
displays → ROP menu displays → CCU menu displays → operation displays → no display.
When the warning information with the highest priority disappears, the warning information with the next highest priority appears.
Priority
Screen
ROP connected
Yes
No
High
↑
↓
Low
Warning displays
Warnings are automatically displayed when
trouble is detected.
● Self-recovery.
● The warning displays are cleared.
● Press the [CHARA] button of the ROP
No display→(WARNING)→ IRIS →Status
displays→ Status1 → Status2 → Status3
→ Status4 → Status5 → Status6 →
Status7 → IRIS
・・・
● Hold down the [CHARA] button of the
ROP.
The warning displays are cleared.
Warnings are automatically displayed when
trouble is detected.
● Self-recovery.
The warning displays are cleared.
● Press the [USER1] button of this unit
(This is enabled when [CHARA] is
assigned to the button.)
•
When the transition source screen is
displayed:
The display switches to the transition
source screen.
•
When the transition source screen is
not displayed:
The warning displays are cleared.
Auto displays
Automatically displayed
Automatically displayed
Status displays
● Perform display operations using the
[CHARA] button of the ROP.
● Press the [CHARA] button of the ROP
No display→(WARNING)→ IRIS →Status
displays→ Status1 → Status2 → Status3
→ Status4 → Status5 → Status6 →
Status7 → IRIS
・・・
● Hold down the [CHARA] button of the
ROP.
The status displays end.
–
CCU menu displays
● When the camera menu is
displayed from the ROP while
a menu of the CCU (this unit)
is displayed, the menu of the
CCU (this unit) disappears.
Display by pressing the menu button on the
unit.
● Operations using the [SELECT] dial on
the unit.
Display by pressing the menu button on the
unit.
● Operations using the [SELECT] dial on
the unit.
Operation displays
Automatically displayed
Automatically displayed
No display
–
–
