31
z
z
INCOM/MIC Screen
This menu is used for the unit’s intercom settings .
Configure the camera’s intercom setting on the camera .
indicates the factory default setting .
Item
Setting
value
Remarks
4W/RTS
IN LEVEL
–40 .0dB
│
0dB
│
20 .0dB
Set the input level for the intercom
(4-WIRE and RTS) signal .
(0 .5dB increments)
4W/RTS
OUT LEVEL
–40 .0dB
│
0dB
│
20 .0dB
Set the output level for the intercom
(4-WIRE and RTS) signal .
(0 .5dB increments)
RTS CANCEL
–40 .0dB
│
31 .5dB
Set the noise canceling level for the
engineering intercom (RTS system) .
(0 .5dB increments)
GAIN PGM
0dB
20dB
Set the gain for the PGM sound .
MIC LEVEL MIC1
–40 .0dB
│
0dB
│
20 .0dB
Finely adjust the level of output from the
MIC OUT 1 connector .
(0 .5dB increments)
MIC LEVEL MIC2
–40 .0dB
│
0dB
│
20 .0dB
Finely adjust the level of output from the
MIC OUT 2 connector .
(0 .5dB increments)
CM/DM
CM
DM
Use this to select the type of intercom
microphone (carbon microphone or
dynamic microphone) to be connected
to the unit .
CM:
Carbon microphone
DM:
Dynamic microphone
CCU INCOM MIC
–40 .0dB
│
0dB
│
12 .0dB
Use this to set the level of the unit’s
intercom microphones for regular use .
(0 .5dB increments)
CCU SIDE TONE
–40 .0dB
│
–6dB
│
0 .0dB
Use this to set the side tone level of the
unit’s intercom for regular use .
(0 .5dB increments)
Items when the MAINTENANCE menu is
selected
Display the START UP screen .
Display the ANALOG GAIN screen .
Display the ND NAME screen .
Display the NETWORK screen .
Display the VERSION screen .
Display the PM VIEW SETTING screen .
Display the PM OPERATION STATUS screen .
Display the SYSTEM screen .
Web settings
(Continued)
