Panasonic AJSDX900 - 24P DVCPRO 50 Operating Instructions Manual Download

Page: 64 / 102

Chapter 5 Preparation

5-4

Audio input signal
preparations

Prepare to connect the audio components which will supply
the audio signals to the unit.

5-4-1

When using the front
microphone

The microphone of the AJ-MC700P mic kit (optional
accessory) can be attached to the viewfinder.

5-4-2

When using an external
microphone

First attach the AJ-MH700P mic holder (optional accessory).

Open the mic holder.

Remove the screws used to attach the mic holder.

Attach the mic holder to the main unit using the screws
provided with the AJ-MH700P mic holder.

Attach the microphone to the mic holder, and tighten the
locking screw.

Connect the microphone’s connecting cable to the MIC IN
jack on the camera.

Attach the microphone, and tighten the locking screw.

Connect the microphone’s connecting cable to the MIC IN
jack on the camera.

Set the AUDIO IN switch or switches to “FRONT” in
accordance with the audio channel or channels whose
sound is to be recorded.

Locking
screw

MIC IN jack

AUDIO IN
switches

Screws provided with mic holder

Locking screw

Summary of Contents for AJSDX900 - 24P DVCPRO 50







































































































Search results

Summary of Contents for AJSDX900 - 24P DVCPRO 50

Reviews:

Related manuals for AJSDX900 - 24P DVCPRO 50

Brands by name

Popular brands

Panasonic AJSDX900 - 24P DVCPRO 50, Operating Instructions Manual

Search results

Summary of Contents for AJSDX900 - 24P DVCPRO 50

Reviews:

Related manuals for AJSDX900 - 24P DVCPRO 50

Brands by name

Popular brands