Specifications
165
S
pec
if
ic
ati
ons
Quantizing:
AVC-Intra100/AVC-Intra50: 10bits
DVCPRO HD/DVCPRO50/DVCPRO/DV: 8bits
Video compression method:
AVC-Intra100/AVC-Intra50: H.264/AVC-Intra
Profile
DVCPRO HD: DV base (SMPTE370M)
DVCPRO50/DVCPRO/DV:
DV base (SMPTE314M)
Bit rate:
AVC-Intra100/DVCPRO HD: 100Mbps
AVC-Intra50/DVCPRO50: 50 Mbps
DVCPRO: 25 Mbps
VIDEO INPUT
Analog composite input:
BNC × 1 (VIDEO IN), 1.0 V[p-p] (75
Ω
)
Reference input:
Automatic switching of black burst/HD 3
value SYNC, BNC × 1 (loop through × 1),
automatic 75
Ω
termination provided
SDI input:
BNC × 1, complies with SMPTE 292M/
296M/299M during HD SDI input, complies
with SMPTE 259M-C/272M-A, ITU-R BT.656-
4 during SD SDI input
VIDEO OUTPUT
Analog component (switchable):
BNC × 3 (Y, P
B
, P
R
)
Y: 1.0 V[p-p], 75
Ω
during HD output mode
Analog composite output (switchable):
BNC × 3, video 1, video 2, video 3,
1.0 V[p-p], 75
Ω
during SD output mode
HD SDI/SD SDI output (switchable):
BNC×1, complies with SMPTE 292M/296M/
299M during HD serial digital output, complies
with SMPTE 259M-C/272M-A, ITU-R BT.656-4
during SD serial digital output
Monitor output:
BNC × 1, 1.0 V[p-p], 75
Ω
VIDEO ADJUSTMENT RANGES
Video output gain:
Can be set to -
∞
to +3 dB or -
∞
to 6 dB
depending on menu
Video output chroma gain:
±3 dB
Video output HUE (chroma phase):
±30°
Video output setup level:
±14 IRE
Video output sync phase:
±15 µs
Video output SC phase:
±180°
DIGITAL AUDIO
Sampling frequencies:
48 kHz (synchronous with video)
Quantizing:
16 bits
Frequency response:
20 Hz to 20 kHz ±1.0 dB
(at the reference level)
Dynamic range:
Better than 85 dB
(1 kHz emphasis off, “A” weighted)
Distortion:
Less than 0.1 %
(1 kHz, emphasis off, reference level)
Crosstalk:
Less than –80 dB
(1 kHz, between 2 channels)
Headroom:
18/20 dB selectable
De-emphasis:
T1 = 50 µs, T2 = 15 µs (auto on/off)
AUDIO INPUT
Analog input (CH1, CH2, CH
3
, CH4):
XLR × 4, 600
Ω
/high impedance selectable
(factory setting: high impedance)
+4/0/–3/–20 dBu selectable
Only CH2 input can be switched between
LINE/MIC/MIC +48 V
MIC:
–60 dBu
MIC+4
8
V:
P48V supported, –60 dBu
SDI input:
BNC × 1, complies with SMPTE 292M/296M/
299M during HD SDI input, complies with
SMPTE 259M-C/272M-A (480/59.94i), ITU-R
BT.656-4 (576/50i) during SD SDI input
AUDIO OUTPUT
Analog output (CH1, CH2, CH
3
, CH4):
XLR × 4, low impedance,
+4/0/–3/–20 dBu selectable
SDI output:
BNC × 1, complies with SMPTE 292M/296M/
299M during HD SDI input, complies with
SMPTE 259M-C/272M-A (480/59.94i), ITU-R
BT.656-4 (576/50i) during SD SDI input
Monitor output:
Pin jacks × 2, –8 dBV, 600
Ω
Headphones:
Stereo mini jack (3.5 mm diameter), 8
Ω
,
variable level
AUDIO