Panasonic AJHPM110E - MEMORY CARD PORTABLE RECORDER/PLAYER Operating Instructions Manual Download

Page: 133 / 168

Setup: Item Settings

133

tup

663

C LEVEL

0000

1000

1413

0.0%

100.0%

141.3%

Adjusts the chroma level (–

∞

to 0 dB to +3 dB).

NOTE:

• This setting is available when CMPST is set in menu No. 650 STYLE.

• Chroma level adjustment is available only for output.

664

HUE/C PHASE

0000

0062

0124

–31.0

0.0

31.0

Adjusts chroma phase (approximately –30 to +30°)

NOTE:

• This setting is available when CMPST is set in menu No. 650 STYLE.

• Chroma phase level adjustment is available only for output.

665

SETUP/BK LVL

0050

0150

0250

–10.0%

0.0%

+10.0%

Adjusts setup level.

NOTE:

• This setting is available when CMPST is set in menu No. 650 STYLE.

• Setup level adjustment is available only for output.

669

SETUP

0000

0001

THRU

CUT&AD

Specifies recording and output method for analog composite signals.

0: Records the input signal in its original form and outputs it without setup.

1: Records the signal with the 7.5% setup processing removed and outputs it with the

7.5% setup added.

673

CONTRAST

0000

0030

0060

–30

Adjusts LCD monitor contrast.

676

BLK CLIP

0000

0001

OFF

Specifies whether or not to clip signals below pedestal level for SD SDI and analog

composite output Y (luminance) signals.

0: Does not clip the signal

1: Clips the signal

677

LCD ASPECT

0000

0001

0002

0003

AUTO

4:3

16:9

15:9

Specifies the aspect ratio of image displayed on the LCD panel.

0: Switches aspect ratio automatically.

1: Displays 480i or 576i images in the 4:3 aspect ratio.

(Displays 1080i or 720p video in the 16:9 aspect ratio.)

2: Displays images in the 16:9 aspect ratio.

3: Displays images in the 15:9 aspect ratio.

NOTE:

Since the LCD monitor on this unit has an aspect ratio of 15:9, a black border may

appear above and below the picture in AUTO or 16:9 mode.

680

CC (F1) BLANK

0000

0001

BLANK

THRU

Turns on and off closed caption signals in the first field output from the SD SDI and analog

composite output.

0: Signals are forcibly blanked.

1: Signals are not blanked.

NOTE:

• In EE mode, the closed captions are output superimposed on the input signal.

681

CC (F2) BLANK

0000

0001

BLANK

THRU

Turns on and off closed caption signals in the second field output from the SD SDI and

analog composite output during playback.

0: Signals are forcibly blanked.

1: Signals are not blanked.

NOTE:

• In EE mode, the closed captions are output superimposed on the input signal.

Item

Setting

Settings and brief function description

No.

SUPER

DISP.

No.

SUPER

DISP.

59.94Hz

29.97Hz

only

59.94Hz

50Hz

23.98Hz

29.97Hz

59-23Hz

25Hz

60-25Hz

only

59.94Hz

only

59.94Hz

only

Summary of Contents for AJHPM110E - MEMORY CARD PORTABLE RECORDER/PLAYER









































































































































































Search results

Summary of Contents for AJHPM110E - MEMORY CARD PORTABLE RECORDER/PLAYER

Reviews:

Related manuals for AJHPM110E - MEMORY CARD PORTABLE RECORDER/PLAYER

Brands by name

Popular brands

Panasonic AJHPM110E - MEMORY CARD PORTABLE RECORDER/PLAYER, Operating Instructions Manual

Search results

Summary of Contents for AJHPM110E - MEMORY CARD PORTABLE RECORDER/PLAYER

Reviews:

Related manuals for AJHPM110E - MEMORY CARD PORTABLE RECORDER/PLAYER

Brands by name

Popular brands