Using Play List: Play List Function
73
Us
ing P
la
y
Li
st
You can set whether pressing the STOP
button during
play list playback should return you to the play list after
playback or not. Use the following procedure to make the
desired setting.
1
Open the play list screen.
2
Press the MENU button.
3
Use the cursor buttons to choose [SETTING] –
[STOP MODE].
4
Select [RETURN] or [STAY] and press the SET
button.
5
Press the MENU button to end setup.
◆
NOTE:
• STAY is the recommended setting during playback of a
play list from an external controller or other device
connected to the remote control connector.
Stop Mode Setup
RETURN:
A return is made to the play list screen
when the STOP
is pressed (or when
an automatic stop occurs at the start or
end of all events). The cursor position
moves to the event where the button was
pressed.
STAY:
A return to the play list screen is not
made and a still picture is output when
the STOP
button is pressed (or when
an automatic stop occurs at the start or
end of all events).
To return to the event list after making
this setting, press the PLAY LIST button
or the EXIT button.
