41
Setup menus
The memory card recorder can hold five user files, each of
which has its own specific menu settings, and one of these
files can be selected for use.
Changing the file
(1) Press the MENU button
(2) Press the FF button while holding down the
DIAG (or SHIFT) button to switch to the next
user file or press the REW button while holding
down the DIAG (or SHIFT) button to return to
the previous user file
Setting and releasing the lock mode
The lock mode can be set to protect the system file and
user file (USER2 to USER5) settings. Once the lock
mode is set, no further changes can be made to the
settings.
Setting and releasing the lock mode can be set for the
system file by using setup menu No. 40 (MENU LOCK)
and for the user files by using setup menu No.A03
(MENU LOCK).
(1) Press the MENU button
(2) Press the REW or FF button while holding
down the DIAG (or SHIFT) button and select the
file for which the lock mode is to be set or
released
(3) Turn the search dial
The cursor (
) on the menu screen is moved to No. 40
(MENU LOCK) for the system file or to No. A03 (MENU
LOCK) for a user file.
(4) Turn the search dial while holding down the
SEARCH button to select whether the lock
mode is to be set or released
To set the lock mode:
Set 0001 (ON) as the setting.
To release the lock mode:
Set 0000 (OFF) as the setting.
When the lock mode has been set, “LOCKED” flashes
on the menu screen. The counter display stops flashing
and remains lighted.
(3) To enter the selection made in step (2) for the
user file which is to be used, press the SET
button
The user file is changed and stored in the memory.
Note:
Since the SYSTEM menu items are not included in user
files 1 through 5, first select the user file and switch to the
SYSTEM file, and then set the SYSTEM menu items.
SYSTEM
USER 1
USER 2
USER 3
USER 4
USER 5
FF
FF
REW
REW
FF
REW
FF
REW
FF
REW
FF
REW
User files
Each user file contains the
following items.
• BASIC
• OPERATION
• INTERFACE
• EDIT
• TIME CODE
• VIDEO
• AUDIO
• V BLANK
• LCD
• MENU
SETUP-MENU
<USER2>
0 0 0
0 0 1
0 0 2
0 0 3
0 0 8
0 0 9
0 1 0
0 1 1
0 1 2
P-ROLL TIME
LOCAL ENA
CTL DISP
REMAIN SEL
DISPLAY SEL
CHARA H-POS
CHARA V-POS
CHARA TYPE
SYS FORMAT
5s
STOP
±
12h
2L
T&STA
4
18
WHITE
50M
NO . 0 0 0 - 0 0 0 5
LOCKED
(5) Press the SET button
The setting is stored in the memory.
Notes:
• The lock mode cannot be set for the USER1 file.
• Once set to the lock mode, a file cannot be reset to the
factory settings even by pressing the RESET button.
