Panasonic AJ-HPM100E Operating Instructions Manual Download

Page: 106 / 152

106

Setup: Unit Setup

Setup

Unit Setup

The settings for this unit consist of SYSTEM, BASIC, OPERATION, INTERFACE, TIME CODE, VIDEO, AUDIO, DIF and MENU. The

SYSTEM setting values are stored in the SYSTEM file. The other setting values are stored in the user setting file. Up to five user

files (USER1 to USER5) can be saved. These settings (up to 4 files) can be written to and loaded from SD memory cards.

This unit can possess up to five user files, each of which can

be selected from a menu setting.

Setting values can be changed as necessary.

➝

For details on change operations, refer to “Changing

Settings” (page 107).

After a change, the content of USER1 can be saved (copied)

to USER2 to USER5.

➝

For details, refer to “Setup menu No. A01 (SAVE)” (page

127).

SETUP menu settings can be saved to and loaded from an SD

memory card.

➝

For details, refer to “Setup menu No. A10 (CARD READ),

A11 (CARD WRITE)” (page 127).

You can specify the user setting files that will be loaded in

USER1 at power up. You can also decide to use the same

settings as last time.

➝

For details, refer to “Setup menu No. A02 (P.ON LOAD)”

(page 127).

A10 CARD READ

A11 CARD WRITE

SD
memory
card

System

Basic

USER1

USER2

USER3

USER4

USER5

Operation

Interface TimeCode

Video

Audio

DIF

User settings file

System

file

SHIFT+FF

SHIFT+REW

Automatic Loading of User Setting File at
Power up

Summary of Contents for AJ-HPM100E

























































































































































Search results

Summary of Contents for AJ-HPM100E

Reviews:

Related manuals for AJ-HPM100E

Brands by name

Popular brands

Panasonic AJ-HPM100E, Operating Instructions Manual

Search results

Summary of Contents for AJ-HPM100E

Reviews:

Related manuals for AJ-HPM100E

Brands by name

Popular brands