Panasonic AJ-HPM100E Operating Instructions Manual Download

Page: 117 / 152

Setup: Item Settings

117

S
e

This menu specifies the ID data that will be returned to the controller.

* An underlined

setting

indicates an initial value.

This menu sets the time code.

* An underlined

setting

indicates an initial value.

INTERFACE

Item

Setting

Settings and brief function description

No.

SUPER

DISP.

No.

SUPER

DISP.

202

ID SEL

0000

0001

0002

OTHER

DVCPRO

ORIG

Specifies the ID data that will be returned to the controller.

0: OTHER

1: DVCPRO

2: ORIG

NOTE:

• Select [OTHER] for ID data for a VTR other than a DVCPRO.

• Select [ORIG] only when specific Panasonic controllers (such as AJ-A850, separately

sold accessory) are connected.

TIME CODE

Item

Setting

Settings and brief function description

No.

SUPER

DISP.

No.

SUPER

DISP.

500

VITC BLANK

0000

0001

BLANK

THRU

Specifies whether or not a VITC signal will be output at the positions selected in menu No.

501 VITC POS-1 and No. 502 VITC POS-2 during playback.

0: VITC signals are not output.

1: VITC signals are output.

NOTE:

• This setting is available only during analog composite output and SD SDI output.

• In EE mode, the input signal is output with the VITC signal.

501

VITC POS-1

When set to 59.94 Hz

Specifies the position where the VITC signal will be inserted.

NOTE:

• You cannot select the same line as in menu No. 502 VITC POS-2.

• This setting is available only during analog composite output and SD SDI output.

0000

0006

0010

10L

16L

20L

When set to 50 Hz

0000

0004

0015

11L

22L

502

VITC POS-2

When set to 59.94 Hz

Specifies the position where the VITC signal will be inserted.

NOTE:

• You cannot select the same line as in menu No. 501 VITC POS-1.

• This setting is available only during analog composite output and SD SDI output.

0000

0008

0010

10L

18L

20L

When set to 50 Hz

0000

0006

0015

13L

22L

Summary of Contents for AJ-HPM100E

























































































































































Search results

Summary of Contents for AJ-HPM100E

Reviews:

Related manuals for AJ-HPM100E

Brands by name

Popular brands

Panasonic AJ-HPM100E, Operating Instructions Manual

Search results

Summary of Contents for AJ-HPM100E

Reviews:

Related manuals for AJ-HPM100E

Brands by name

Popular brands