Setup: Audio V Fade Function
135
S
e
tu
p
Audio V Fade Function
This section describes the differences between audio processing provided by setup menu No. 731 (PB FADE) settings. Setup
menu No. 731 (PB FADE) settings make it possible to perform audio V fade or cut processing between clips and events during
clip selection and playback or play list playback.
Described below are examples that illustrate the differences in processing.
These examples involve a clip that spans multiple P2 cards and a second clip generated by edit copy.
•
A clip that spans multiple P2 cards or a clip that has
been automatically divided and recorded on an 8 GB
P2 card
•
A clip created using the edit copy function on an
AJ-SPD850
Settings in setup menu No.731 allow you to play back the
above two clips and do the following.
•
When CUT is selected
•
When AUTO is selected
V fade processing is performed automatically between clips
and events.
The following items are not V fade processed.
• Clips that span multiple P2 cards
• Clips that have been automatically divided when using 8 GB
or larger P2 cards
• 1394 digital output signals are not fade processed.
Clip 1-1
Clip 1
Clip 1-2
Event A
Clip 2
Event B
Event A
Event B
Clip 2
Clip 1
Clip 1-1
Clip 1-2
Noise appears at the edit points.
Event A
Event B
Clip 2
Clip 1
Clip 1-1
Clip 1-2
V fade is performed instantaneously to remove noise.
