Panasonic AGDVX100BP - DVC CAMCORDER Page 7 Operating Instructions Manual Download

Page: 7 / 88

Read this first!

Always take some trial shots before actual shooting.

• When shooting important events (such as weddings), always take some trial shots and check that the

sound and images have been recorded properly before actual shooting.

Panasonic makes no guarantees for your recordings.

• Please understand that Panasonic makes no guarantees for your recordings in cases where images and/

or sound were not recorded as you intended due to problems with the camera-recorder or cassette.

Respect copyrights

• Copyright laws forbid the use of video and audio material you have recorded for any purpose other than

your own personal enjoyment. Remember that restrictions apply to the shooting of certain material even if
it is intended for private use.

Note concerning illustrations in these instructions

• Illustrations (camera-recorder, menu screens, etc.) in these operating instructions differ slightly from the

actual camera-recorder.

References

• References are shown as (Page 10).

Tapes you can use

• You can use tapes with this mark-

Accessories

IMPORTANT

“Unauthorized recording of copyrighted television programs, video tapes and other materials may infringe the

right of copyright owners and be contrary to copyright laws.”

Battery *

AC Adapter *

AC power supply cord

DC cord

Wireless remote
control and button
battery (CR2025)

Eye cup

Microphone holder

2x 6-mm screws
2x 12-mm screws

Microphone holder
adapter

Shoulder belt

Lens cap strap

Mini DV cassette tape
(AY-DVM63MQ)

* For part numbers for the battery and AC adapter, see “Optional Units” (Page 86).

Bef

use

Summary of Contents for AGDVX100BP - DVC CAMCORDER

























































































Search results

Summary of Contents for AGDVX100BP - DVC CAMCORDER

Reviews:

Related manuals for AGDVX100BP - DVC CAMCORDER

Brands by name

Popular brands

Panasonic AGDVX100BP - DVC CAMCORDER, Operating Instructions Manual

Search results

Summary of Contents for AGDVX100BP - DVC CAMCORDER

Reviews:

Related manuals for AGDVX100BP - DVC CAMCORDER

Brands by name

Popular brands