– 107 –
Chapter 6 Thumbnail Operations for Clips — Thumbnail operations
4
Select the thumbnail to be replaced from text memos,
place the pointer on it, and select [OPERATION]
→
[EXCH.
THUMBNAIL] on the thumbnail menu.
5
Press the <SET> button to display the [YES]/[NO]
confirmation screen, and use the cursor buttons and the
<SET> button to select [YES].
The menu closes and the thumbnail for the clip is replaced.
@
@
NOTE
t
Display clip properties by selecting the thumbnail menu
→
[PROPERTY]
→
[CLIP PROPERTY] to confirm the position of the
thumbnail in the [THUMBNAIL] item (the number of frames from
the top of the clip). Since thumbnails usually come from the top of
the clip, 0 is displayed.
Shot mark
Shot marks can be added to a clip thumbnail to distinguish the clip from others.
1
Press the <THUMBNAIL> button.
The thumbnail screen appears on the viewfinder screen.
2
Use the cursor buttons to move the pointer over the clip to
which you want to attach a shot mark.
3
Press the <USER> buttons to which the shot mark recording
function is assigned or the <RET> button on the lens.
f
This adds a shot mark to the thumbnail of the clip at the pointer
position.
f
To delete a shot mark, place the pointer again and press the
<USER> buttons to which the shot mark recording function is
assigned or the <RET> button on the lens.
<USER MAIN>/<USER1>/<USER2> buttons
@
@
NOTE
t
A shot mark can be attached during recording.
t
Add shot marks after recording stops to attach the shot mark to the
most recently recorded clip.
For details, refer to “Shot mark recording function” (page 44).
t
When adding a shot mark to or deleting the shot mark from a clip
recorded across multiple P2 cards, do this with all these P2 cards
inserted into card slots.
Text memo
During recording or playback, you can add text memos. Text memos can be used to play back clips at some point or break clips into chunks and copy
the necessary portions.
Adding a text memo
Text memos can be added in one of the following ways.
f
Press the <USER> buttons to which the text memo recording function is assigned or the <RET> button on the lens during recording/playback.
This adds a text memo at the position where the button was pressed.
f
While the thumbnail screen is displayed, press the <USER> buttons to which the text memo recording function is assigned or the <RET> button on the
lens to add a text memo at the beginning of a clip.
