Panasonic ag-hpx600ej Page 124 Operating Instructions Manual Download

Page: 124 / 178

– 124 –

Chapter 7 Menu Operations — Menu list

[SYSTEM SETUP] screen

Item

Description of settings

Remark

SYSTEM MODE

Sets the signal format of the camera.

[1080-59.94i], [1080-23.98PsF] (OP4), [1080-50i], [720-59.94P], [720-50P],

[480-59.94i], [576-50i]

[TURN POWER OFF] is displayed when the setting is changed. Turn off the

power of the camera once, and turn it on again.

This setting is not available in USB device mode.

This setting is not available when clip connection

is underway with one-clip recording.

The factory settings may differ depending on the

region.
(AG-HPX600P: [1080-59.94i], AG-HPX600EJ:

[1080-50i], AG-HPX600EN: [1080-50i])

When OP4 is not installed
The [1080-23.98PsF] setting item is grayed out

and cannot be selected.

REC SIGNAL (OP2)

Selects the input signal. The [SDI IN] item can be selected when the HD/SD SDI

input board (extra-cost option) is installed.

This item is not displayed when [SYSTEM MODE]

is [1080-23.98PsF].

When [SDI IN] is selected, images are recorded

with 60i or 50i regardless of the [REC FORMAT]

setting.

This setting is not available when clip connection

is underway with one-clip recording.

[CAMERA]

Records camera shooting signals of the camera.

[SDI IN]

Records input signals to <SDI OUT/IN (OP)> terminal.

It is always set to [CAMERA] when the power is turned on.

REC FORMAT

Selects the recording codec, and shooting and recording modes.

When [REC SIGNAL] is [SDI IN], recording is

performed in a normal mode (60i or 60P) even if

the native recording is selected.

This setting is not available in USB device mode.

This setting is not available when clip connection

is underway with one-clip recording.

When [SYSTEM MODE] is [1080-59.94i]

[AVC-I100/60i],

[AVC-I100/30PN],

[AVC-I100/24PN]

Recorded using the AVC-I 100 codec. 60i, 30PN (native

recording), and 24PN (native recording) are used for shooting

and recording, respectively.

[AVC-I50/60i],

[AVC-I50/30PN],

[AVC-I50/24PN]

Recorded using the AVC-I 50 codec. 60i, 30PN (native

recording), and 24PN (native recording) are used for shooting

and recording, respectively.

[DVCPROHD/60i]

Recorded using the DVCPRO HD codec. Shooting mode can

be set at the [CAMERA MODE] item. Recording is fixed to 60i.

When [SYSTEM MODE] is [720-59.94P]

[AVC-I100/60P],

[AVC-I100/30PN],

[AVC-I100/24PN]

Recorded using the AVC-I 100 codec. 60i, 30PN (native

recording), and 24PN (native recording) are used for shooting

and recording, respectively.

[AVC-I50/60P],

[AVC-I50/30PN],

[AVC-I50/24PN]

Recorded using the AVC-I 50 codec. 60i, 30PN (native

recording), and 24PN (native recording) are used for shooting

and recording, respectively.

[DVCPROHD/60P],

[DVCPROHD/30PN],

[DVCPROHD/24PN]

Recorded using the DVCPRO HD codec. 60P, 30PN (native

recording), and 24PN (native recording) are used for shooting

and recording, respectively.

When [SYSTEM MODE] is [480-59.94i]

[DVCPRO50/60i],

[DVCPRO/60i],

[DV/60i]

Recorded using the DVCPRO50, DVCPRO, and DV codec,

respectively. Shooting mode can be set with the [CAMERA

MODE] item. Recording is fixed to 60i.

When [SYSTEM MODE] is [1080-23.98PsF] (*OP4)

[AVC-I100/24PN]

Recorded using the AVC-I 100 codec. 24PN (native recording)

is used for shooting and recording.

[AVC-I50/24PN]

Recorded using the AVC-I 50 codec. 24PN (native recording) is

used for shooting and recording.

REC FORMAT

When [SYSTEM MODE] is [1080-50i]

When [REC SIGNAL] is [SDI IN], recording is

performed in a normal mode (50i or 50P) even if

the native recording is selected.

This setting is not available in USB device mode.

This setting is not available when clip connection

is underway with one-clip recording.

[AVC-I100/50i],

[AVC-I100/25PN]

Recorded using the AVC-I 100 codec. 50i and 25PN (native

recording) are used for shooting and recording, respectively.

[AVC-I50/50i],

[AVC-I50/25PN]

Recorded using the AVC-I 50 codec. 50i and 25PN (native

recording) are used for shooting and recording, respectively.

[DVCPROHD/50i]

Recorded using the DVCPRO HD codec. Shooting mode can

be set with the [CAMERA MODE] item. Recording is fixed to

50i.

When [SYSTEM MODE] is [720-50P]

[AVC-I100/50P],

[AVC-I100/25PN]

Recorded using the AVC-I 100 codec. 50P and 25PN (native

recording) are used for shooting and recording, respectively.

[AVC-I50/50P],

[AVC-I50/25PN]

Recorded using the AVC-I 50 codec. 50P and 25PN (native

recording) are used for shooting and recording, respectively.

[DVCPROHD/50P],

[DVCPROHD/25PN]

Recorded using the DVCPRO HD codec. 50P and 25PN (native

recording) are used for shooting and recording, respectively.

When [SYSTEM MODE] is [576-50i]

[DVCPRO50/50i],

[DVCPRO/50i],

[DV/50i]

Recorded using the DVCPRO50, DVCPRO, and DV codec,

respectively. Shooting mode can be set with the [CAMERA

MODE] item. Recording is fixed to 50i.

indicates factory setting values.

Summary of Contents for ag-hpx600ej



















































































































































































Search results

Summary of Contents for ag-hpx600ej

Reviews:

Related manuals for ag-hpx600ej

Brands by name

Popular brands

Panasonic ag-hpx600ej, Operating Instructions Manual

Search results

Summary of Contents for ag-hpx600ej

Reviews:

Related manuals for ag-hpx600ej

Brands by name

Popular brands