INF-11
4-2. ADJUST menu
NOTE: Please do not change the setting of the items of “CAM DEBUG MODE” and “DARK MODE”. These
items are for factory use only.
4-2-1. Adjustment item for Video Level
Y LEVEL
Y level of VIDEO OUT signal can be adjusted on this item.
The setting value is the same as value for Luminance level in Video Terminal Output Level adjustment (EVR).
C LEVEL
C level of VIDEO OUT signal can be adjusted on this item.
The setting value is the same as value for Chroma level in Video Terminal Output Level adjustment (EVR).
CMPNT Y LVL
Component Y level of COMPONENT OUTPUT signal can be adjusted on this item.
The setting value is the same as value for Component Y level in D-Terminal Output Level adjustment (EVR).
CMPNT PB LVL
Component PB level of COMPONENT OUTPUT signal can be adjusted on this item.
The displayed value is the same as value for Component PB level in D-Terminal Output Level adjustment (EVR).
CMPNT PR LVL
Component PR level of COMPONENT OUTPUT signal can be adjusted on this item.
The displayed value is the same as value for Component PR level in D-Terminal Output Level adjustment (EVR).
4-2-2. Adjustment method for Video Level
1. Tilt the
OPERATION lever
in the
▲
▼
direction to select the
adjustment item, and press the
OPERATION
lever
(or tilt lever in
►
direction).
And press the
OPERATION lever
again.
2. Tilt the
OPERATION lever
in the
►
direction
so that the adjustment bar is appeared. And adjust by tilt the
OPERATION lever
in the
◄
►
direction.
ADJUST MENU 1/2
Y LEVEL
1eh
C LEVEL
1eh
CMPNT Y LVL
1eh
CMPNT Pb LVL
1eh
CMPNT Pr LVL
1eh
SETUP
ENTER
EXIT
MENU
ADJUST MENU 1/2
Y LEVEL
1eh
C LEVEL
CMPNT Y LVL
CMPNT Pb LVL
CMPNT Pr LVL
SETUP
ENTER
EXIT
MENU
ADJUST MENU 1/2
Y LEVEL 1eh
SETUP
ENTER
EXIT
MENU
ADJUST MENU 1/2
Y LEVEL 1eh
SETUP
ENTER
EXIT
MENU
