7
Before use
(continued)
•
In no event will Panasonic be liable for any damages, including any incidental
or consequential damages, stemming from a failure to record data or from lost
settings or data.
Any of the following actions can result in problems:
• Power supply to the recorder is interrupted or impaired during recording, for
example by starting an engine.
• If a P2 card is ejected while it is being accessed.
Finding related information
In this manual, the format “see page
00” is used to indicate pages with
relevant information.
Compatible memory cards
Only P2 cards identified by the P2
logo can be used with the recorder.
Before using a new 16 GB or higher
P2 card, be sure to format it on a
computer that has the P2 card
driver installed. The number of files
that you can record on a 16 GB or
higher P2 card is as follows.
Never remove the P2 card
while it is being accessed
In some rare cases, the P2 card slot
may become inoperative. When this
is detected, the recorder automatically
restarts itself.
Before disconnecting the
power cable, make sure that
recorder shutdown was
performed properly
Never disconnect the power cable
while the recorder is operating. In
particular, if the power cable is
disconnected during recording, P2
card managing information and data
setting information may be lost or
damaged. If the P2 card managing
information has been damaged and
files can no longer be read properly,
you should format the P2 card.
AJ-
P2C016RG
AJ-
P2C032RG
62 days
130 days
339 files/
508 files
339 files/
508 files
Card model
number
Number of
recording
days
Number of maximum
recording files/days
(with and without
bookmarks)
