36
Troubleshooting
(continued)
(Check this with the Toughbook-Arbitrator Front
End Software.)
• Are camera and video monitoring equipment
connected properly?
• Are both the video input connector selection and
the input selection made with the Toughbook-
Arbitrator Front End Software the same?
• Are the video output settings correct for the
connected equipment? Connect a monitor to the
VIDEO OUT connector on the rear panel of the
recorder and check the picture.
(Check this with the Toughbook-Arbitrator Front
End Software.)
• Is the cable connection to the audio input
correct?
• Are both the audio input connector selection
and the input selection made with the
Toughbook-Arbitrator Front End Software the
same?
• Are the audio output settings correct for the
connected equipment? Consult the
documentation of the connected equipment to
check this.
• Check the audio settings at the computer.
(Check this with the Toughbook-Arbitrator Front
End Software.)
• Are the communication settings of the
connected equipment and the settings for the
SERIAL port of the recorder the same? Check
this while referring to the documentation for
connected equipment and the Toughbook-
Arbitrator Front End Software.
Video is distorted or not
recorded.
Sound is distorted or not
recorded.
Information from
equipment connected via
the GPIO/SERIAL port is
not recorded in the meta
data file