26
Factory default settings
(continued)
8 V-CH
1
Video input
Setting values1:
Camera cable connector input
2:
VIDEO IN connector input
9 AUDIO2
MIC
Audio input
Setting values:
AUDIO IN2
MIC
(For information on audio settings, see page 21.)
10 Pre Time
120
Prerecord time (seconds)
Setting values:
0 - 180
Audio Pre
Enabled
Audio Prerecord
Setting values:
Enabled
Disabled
11 Post Time
120
Post-record time (seconds)
Setting values:
0 - 180
Audio Post
Enabled
Audio Post-record
Setting values:
Enabled
Disabled
12 Power On/Off
120
Time lag between SIGNAL off and
recorder shutdown (minutes)
Setting values:
0 - 180
1
13 P-Rec
OFF
Automatically start recording at SIGNAL ON
Setting values:
ON
OFF
GPIO
Settings for GPIO ports 1 - 8 (common to all ports)
GPIO On/Off
ON
Enable/disable global GPIO
Setting values:
ON (Globally enable GPIO input)
OFF (Globally disable GPIO input)
DETECTION
H
Individual trigger settings for GPIO 1 - 8
Setting values:
N (No input)
H (High-edge trigger)
L (Low-edge trigger)
B (Both-edge trigger)
Name
----
GPIO 1 - 8 names
Setup
ON
Individual OSD display settings for GPIO 1 - 8
Setting values:
ON (OSD on)
OFF (OSD off)
Printable
-
OSD character string for GPIO 1 - 8
15 AUDIO2 REC
ON
Audio R-CH recording
Setting values: ON
OFF
14
1
When set to “0”, the recorder will perform shutdown after about one minute.
