14
Connections
• Turn power to all components off and disconnect the power cables before making
any connections. Be sure to finish all other connections first, and then connect
the power cables last. Also refer to the connector signal diagram on page 31 and
to the documentation of the components that are to be connected.
• Verify that recording is not in progress prior to disconnecting any cables from the recorder.
Be sure to disconnect the power cable first, and then disconnect any other cables.
• A wrong power cable connection will lead to malfunction. Make sure that the
power cable is connected correctly.
• To reduce the risk of fire or shock hazard, installation and wiring must only be
performed by a professional installer.
• To reduce the risk of fire, the red (BATT) and white (SIGNAL) wires of the
power cable must be connected via fuses (5 A – 20 A) having UL Listing.
• The provided power cable is not for use in the engine compartment.
