- 9 -
∫
Attaching the microphone holder
≥
Attach by using a commercially available screw driver.
≥
When attaching an external microphone (optional) to the microphone holder attachment part, use
the supplied microphone holder and microphone holder adaptor.
≥
The microphone holder is set up so that a 21 mm (0.83
q
) external microphone (AG-MC200G:
optional) can be attached. Check in advance whether the microphone you wish to use can be
attached.
≥
When attaching the microphone holder and the microphone holder adaptor, be sure to tighten the
screws firmly even though you might hear a squeaking sound.
≥
When wiring the microphone cable, use the cable clamper of the microphone holder adaptor.
∫
Attaching the tripod
≥
There are tripod mounting holes that are compatible
with 1/4-20UNC and 3/8-16UNC screws. Use the size
that matches the diameter of the tripod’s fixing screw.
≥
Attaching a tripod with a screw length of 5.5 mm
(0.22
q
) or more may damage the unit.
A
Microphone holder attachment part
B
Microphone holder adaptor
C
External microphone (optional)
D
Microphone holder screws (6 mm
(0.24
q
))
E
Microphone holder
F
Microphone holder screws (12 mm
(0.47
q
))
G
Cable clamper
H
Microphone holder adaptor
A
Tripod receptacle
AG-AC90A-SQT0333_mst.book 9 ページ ２０１４年５月１４日 水曜日 午前１０時３６分
