Panasonic AG-AC90AP Operating Instructions Manual Download Page 101

Page: 101 / 126

- 101 -

Selects the brightness level of the right-leaning zebra patterns on the screen.

Touch [ZEBRA DETECT 2].

≥

Touch [SET].

Touch

to adjust settings.

Touch [ENTER].

≥

Touch [EXIT] to exit the menu screen.

≥

Zebra 2 can be displayed by pressing the ZEBRA button after setting. (

)

Displaying of the luminance level display marker can be switched.

≥

Marker can be displayed by pressing ZEBRA button when set to [ON]. (

)

You can check if the image is level while recording motion pictures and still pictures. The function
can also be used to estimate the balance of the composition.

≥

The guidelines do not appear on the images actually recorded.

≥

When Focus Assist is set to on, the following occurs. (

)

The guidelines are not displayed. (these are displayed on the TV when this unit is connected to
TV.)

The setting cannot be changed.

Display of the range that can be displayed with the common household TV (safety zone) can be
switched.

≥

The safety zone is not displayed on the images that is actually recorded.

Displays/hides the center marker.

[ZEBRA DETECT 2]

[SET]/[OFF]

[MARKER]

[ON]/[OFF]

[GUIDE LINES]

[OFF]/

[SAFETY ZONE]

Aspect ratio

Safety zone

[16:9]

[16:9 90%]/[4:3]/[14:9]/[1.85:1]/[2:1]/[2.35:1]/
[2.39:1]/[OFF]

[4:3]

[4:3 90%]/[4:3]/[OFF]

[CENTER MARKER]

[ON]/[OFF]

AG-AC90A-SQT0333_mst.book 101 ページ２０１４年５月１４日　水曜日　午前１０時３６分

Summary of Contents for AG-AC90AP































































































































Search results

Summary of Contents for AG-AC90AP

Reviews:

Related manuals for AG-AC90AP

Brands by name

Popular brands

Panasonic AG-AC90AP, Operating Instructions Manual

Search results

Summary of Contents for AG-AC90AP

Reviews:

Related manuals for AG-AC90AP

Brands by name

Popular brands