- 62 -
Zebra
Zebra display:
Parts where white saturation (color saturation) is likely to occur (extremely brightly lit or shiny parts)
are displayed with diagonal lines (zebra pattern).
Marker display:
Displays the luminance level of the center of the screen (luminance display frame) in %.
It makes the adjustment of the brightness of the object easier, by checking the luminance level of
the object, when recording same object in different surroundings.
≥
Marker display is displayed between 0% and 99%. It will be displayed as 99% when it is over
99%.
≥
You can record an image with little white saturation if you manually adjust the shutter speed or
brightness. (
,
)
≥
The zebra pattern does not appear on the images actually recorded.
≥
It is also possible to adjust the level of the zebra pattern to be displayed. (
)
Color Bar Screen
≥
To cancel, press the BARS button again.
≥
It will be canceled when the unit is turned off.
≥
While the color bar is displayed, a test tone will be output from the headphone terminal, HDMI
terminal and AV multi terminal. (The test tone that is output will be 1 kHz.) It will not be output
from the speaker of this unit.
≥
It is possible to record the color bar screen.
≥
It is not possible to display/hide the color bar during recording.
ZEBRA button
It will switch between the zebra display and the marker display every time the button is pressed.
Zebra 1
#
Zebra 2
*
#
Marker
*
#
setting canceled
* It is not displayed when the [ZEBRA DETECT 2]/[MARKER] is set to [OFF]. (
)
BARS button
Press the BARS button to output a color bar screen to a television or monitor so you can adjust
them.
AG-AC90A-SQT0333_mst.book 62 ページ ２０１４年５月１４日 水曜日 午前１０時３６分
