Panasonic AG-AC90AP Operating Instructions Manual Download Page 103

Page: 103 / 126

- 103 -

This shows or hides indications on the screen except for [USER BUTTON DISPLAY], [GUIDE
LINES], [SAFETY ZONE], [CENTER MARKER], [DATE/TIME], [LEVEL METER], [LENS STATUS]
and [CARD&BATTERY].

Detected faces appear with frames in the Intelligent Auto Mode.

≥

Up to 15 frames are indicated. Larger faces and faces nearer to the center of the screen take
preference over others.

∫

Prioritized face framing

Prioritized face framing is displayed as orange frames. Focus and adjustment of brightness will be
performed against the prioritized face framing.

≥

Prioritized face framing is only displayed with Portrait Mode in the Intelligent Auto Mode.

≥

The white frame is for face detection only.

≥

It cannot be set while in the Interval Recording is used.

This makes it easier to view the LCD monitor in bright places including outdoors. (

)

It adjusts brightness and color density on the LCD monitor. (

)

Brightness of the viewfinder can be switched. (

)

[OTHER DISPLAY]

[ON]/[OFF]

[FACE FRAMING]

[OFF]:

Cancel the setting.

[PRIMARY]:

Only the prioritized face framing is displayed.

[ALL]:

All face detection framings are displayed.

[POWER LCD]

[ON]/[OFF]

[LCD SET]

[EVF SET]

[BRIGHT]/[NORMAL]/[DARK]

AG-AC90A-SQT0333_mst.book 103 ページ２０１４年５月１４日　水曜日　午前１０時３６分

Summary of Contents for AG-AC90AP































































































































Search results

Summary of Contents for AG-AC90AP

Reviews:

Related manuals for AG-AC90AP

Brands by name

Popular brands

Panasonic AG-AC90AP, Operating Instructions Manual

Search results

Summary of Contents for AG-AC90AP

Reviews:

Related manuals for AG-AC90AP

Brands by name

Popular brands