Panasonic AG-3200P, Operating Instructions Manual

Page: 17 / 24

— 17 —
Page 17 June 4, 2002 2:04 pm
Cable Box or DBS Receiver Brand Setting
A
Turn on cable box or DBS receiver
Turn on the cable box or DBS receiver using the Power button on
the unit or its Remote.
B
Enter brand code
A
Press and hold CABLE/DBS .
B
Press MBR SET .
C
Press the Number keys to enter your cable box’s (or DBS
receiver’s) brand code.
D
Press OK , and release CABLE/DBS .
C
Operate cable box or DBS receiver
While holding down CABLE/DBS , press one of the following
buttons: POWER
1
, TV CH+/– , and the Number keys .
●
For some brands, you must press ENTER after having pressed the
Number keys to enter a channel number.
●
To change the cable box’s (or DBS receiver’s) channels, press TV
CH+/– or the Number keys . (The CH+/– button can be used to
change the VCR’s channels only.)
Changing Remote Control Code
This Remote is capable of transmitting two control codes; one set
to respond to A code control signals and another set to respond to
B code control signals. This Remote control is preset to send A
code signals because your VCR is initially set to respond to A code
signals. You can easily modify your VCR and the Remote to
respond to B code signals. When using
two PANASONIC VCRs ,
set two VCRs and their Remotes to different codes, so that you can
operate these VCRs separately.
A
Set remote control code for Remote
A
Press and hold A/B .
B
Press the Number key “ 2 ”.
C
Press OK , and release A/B .
●
The Remote now can transmit B code control signals.
B
Check remote control code for VCR
Press and hold
4
on the VCR for more than 5 seconds while the
VCR is turned off. The code currently set appears on the display
panel.
C
Change code for VCR
Press any key on the Remote. The VCR now responds to B code
control signals.
●
To set the Remote and the VCR back to A code control signals,
repeat the same procedure as shown above except pressing the
Number key “ 1 ” in step B of
1 1 1 1
.
To control two VCRs with the same Remote
You can control two PANASONIC VCRs by switching the remote
control code for the Remote between A and B (
墌
step
A A A A
),
keeping two VCRs to different control codes.
●
To change only the remote control code for the Remote, DO
NOT perform steps
B B B B
and
C C C C
.
CABLE BOX BRAND CODE
PANASONIC
ARCHER
CABLETENNA
CABLEVIEW
CITIZEN
CURTIS
DIAMOND
GC BRAND
GEMINI
GENERAL INSTRUMENTS
HAMLIN
JASCO
JERROLD
NOVAVISION
OAK
PULSER
RCA
REGAL
REMBRANDT
SAMSUNG
SCIENTIFIC ATLANTA
SIGMA
SL MARX
SPRUCER
STARGATE
TELEVIEW
TOCOM
UNIKA
UNIVERSAL
VIDEOWAY
ZENITH 13, 14
01, 05, 17
01, 17
15, 16, 17, 21, 25
15, 16, 17, 21, 25
02
01, 17
15, 16, 17, 21, 25
15
01, 04, 06, 11, 12, 15, 28
10, 18, 23
15
01, 04, 06, 11, 12, 15, 28
02
07
15, 16, 17, 21, 25
13, 14
10, 18, 23
01, 16, 17
05, 16, 24
02
07
05, 16, 17, 24, 25
13, 14
05, 15, 16, 17, 21, 24, 25
05, 16, 24
01, 04, 16
01, 17
16, 17, 25
03, 09, 22
03, 09, 22
DBS RECEIVER BRAND CODE
ECHOSTAR (DISH Network)
JVC (DISH Network)
SONY (DSS)
RCA (DSS) 51
51
41
40
AG-3200P-EN.fm Page 17 Tuesday, June 4, 2002 2:12 PM