Panasonic AFP7CCM1, User Manual

Page: 85 / 139

8.2 List of MODBUS RTU Supported Commands
8-3
8.2 List of MODBUS RTU Supported Commands
8.2.1 List of MODBUS Function Codes

Table of supported commands
Code Name (MODBUS) Name
Remarks
(Reference No.)
FP7 supported
functions
01 Read Coil Status Read Y and R Coils 0X
●
02 Read Input Status Read X Contact 1X
●
03 Read Holding Registers Read DT 4X
●
04 Read Input Registers Read WL and LD 3X
●
05 Force Single Coil Write Single Y and R 0X
●
06 Preset Single Register Write DT 1 Word 4X
●
08 Diagnostics Loopback Test - -
15 Force Multiple Coils Write Multiple Y's and R's 0X
●
16 Preset Multiple Registers Write DT Multiple Words 4X
●
22 Mask Write 4X Register Write DT Mask 4X -
23 Read/Write 4X Registers Read/Write DT 4X -
(Note 1) Types of MODBUS function codes vary by instructions to be used.

Correspondence table for MODBUS reference No. and device No.
MODBUS reference No. Data on BUS
(hexadecimal)
PLC device number
000001-002048 0000-07FF Y0-Y127F Coil
002049-034816 0800-87FF R0-R2047F
Input 100001-108192 0000-1FFF X0-X511F
Holding register 400001-465536 0000-FFFF DT0-DT65535
300001-301024 0000-03FF WL0-WL1023 Input register
302001-318384 07D0-47CF LD0-LD16383
(Note 1) The table above indicates correspondence between the MODBUS reference numbers for accessing from a
higher device to FP7 using the MODBUS protocol, and the operation device numbers of FP7.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com