Panametrics DigitalFlow XMT868i, Startup Manual, Page: 91 / 94

<Doc Tittle> <Manual Type> 1
We,
Panamerics Sensing
1100 Technology Park Drive
Billerica, MA 01821
USA
declare under our sole responsibility that the
DigitalFlow™ IGM878 Industrial Gas Flow Ultrasonic Transmitter
DigitalFlow™ XGM868 Gas Flow Ultrasonic Transmitter
DigitalFlow™ XGS868 Steam Flow Ultrasonic Transmitter
DigitalFlow™ XMT868 Liquid Flow Ultrasonic Transmitter
to which this declaration relates, are in conformity with the following standards:
•
EN 60079-0: 2007
• EN 60079-1: 2004
• EN 50281-1-1: 1998
• II 2 GD EEx d IIC T5; ISSeP02ATEX008 (ISSeP, B7340 Colfontaine, Belgium - NoBo 492)
• EN 61326-1: 2006, Class A, Table 2, Industrial Locations
• EN 61326-2-3: 2006
• EN 61010-1: 2012, Overvoltage Category II
Other standards Used:
•
EN 50014: 1997 +A1, A2, A3
• EN 50018: 2000
following the provisions of the 2004/108/EC EMC, 2006/95/EC Low Voltage and 94/9/EC ATEX Directives.
Where products were initially assessed for compliance with the Essential Health and Safety Requirements of the
ATEX Directive 94/9/EC using earlier harmonized standards, a subsequent review has determined that “technical
knowledge” is unaffected by the current harmonized standards listed above.
The units listed above and any ancillary equipment supplied with them do not bear CE marking for the Pressure
Equipment Directive, as they are supplied in accordance with Article 3, Section 3 (sound engineering practices and
codes of good workmanship) of the Pressure Equipment Directive 97/23/EC for DN<25.
Billerica - September 1, 2015
Issued
Mr. Gary Kozinski
Certification & Standards, Lead Engineer