Panametrics DigitalFlow XMT868i, Startup Manual, Page: 9 / 94

DigitalFlow™ XMT868i Startup Guide 1
Chapter 1. Installation
Chapter 1. Installation
1.1 Introduction
To ensure safe and reliable operation of the Model XMT868i Flowmeter, the system must be installed in accordance
with the guidelines established by Panametrics engineers. Those guidelines, explained in detail in this chapter,
include the following topics:
•
Unpacking the Model XMT868i system
• Selecting suitable sites for the electronics enclosure and the flowcell/transducers
• Installing the flowcell/transducers
Note: See the enclosed Transducer Installation Guide for detailed instructions on transducer installation.
• Installing optional temperature transmitters
• Installing the electronics enclosure
• Wiring the electronics enclosure
WARNING!
The Model XMT868i flow transmitter can measure the flow rate of many fluids, some potentially
hazardous. The importance of proper safety practices cannot be overemphasized.
Be sure to follow all applicable local safety codes and regulations for installing electrical equipment
and working with hazardous fluids or flow conditions. Consult company safety personnel or local
safety authorities to verify the safety of any procedure or practice.
WARNING!
To meet CE Mark requirements, all cables must be installed as described in
Appendix A, CE Mark Compliance .
1.2 Unpacking
Carefully remove the electronics enclosure, the transducers, and the cables from the shipping containers. Before
discarding any of the packing materials, account for all components and documentation listed on the packing slip.
The discarding of an important item along with the packing materials is all too common. If anything is missing or
damaged, contact the factory immediately for assistance.