DigitalFlow™ XMT868i Startup Guide
5
Chapter 3. Operation
3.5 Taking Measurements
The Model XMT868i is capable of displaying several different variables in a variety of formats. However, this manual
will only discuss the basic measurement displays using the LCD display or the PanaView display. Refer to Chapter 2,
Displaying Data
, in the
Programming Manual
for instructions on setting up alternate choices. Also, refer to the
Programming Manual
and/or the
PanaView User’s Manual
to use PanaView or the analog outputs to obtain the flow
rate data.
3.5.1
Programming the LCD
Note:
When you first initialize the XMT868i, the number of LCD parameters is set to OFF. You must program the LCD
to display any measured parameters.
Through the
Keypad Program
, you can program the LCD display to display up to four variables in sequence.
Complete the following steps to program the LCD display:
1.
Power up the XMT868i and wait until it has initialized.
2.
Press
[Escape]. [Enter], [Escape]
.
3.
In the
Keypad Program
window, scroll to
PROG
and press
[Enter]
.
4.
In the
PROG
menu, scroll to
GLOBL
and press
[Enter].
5.
Scroll to
I/O
and press
[Enter]
.
6.
Scroll to
LCD
and press
[Enter]
.
7.
The window now asks for the
# of LCD Parameters
. Scroll to the desired number (from
OFF
through
1-4
and
KEY
)
and press
[Enter]
.
The
OFF
setting switches the measurement display off, while the
KEY
setting enables users to change the
measurement display using the arrow keys, without accessing the
Keypad Program.
If you select
KEY
:
•
To view a parameter other than the one currently displayed, press the [
] and [
] keys to scroll through the
various parameters.
•
To view the channel measurements on a two-channel XMT868i, press the [
] or [
] keys until you have reached
the desired channel and measurement.
For a 1-Channel XMT868i, the data for Channel 1 is displayed automatically, and you can skip to step 9. However, for a
2-Channel meter, the channel data to be displayed must be specified at the following prompt.
Summary of Contents for DigitalFlow XMT868i
