![background image](http://html1.mh-extra.com/html/panametrics/digitalflow-xgs868i/digitalflow-xgs868i_startup-manual_3410955009.webp)
DigitalFlow™ XGS868i Startup Guide
1
Chapter 1. Installation
Chapter 1. Installation
1.1
Introduction
To ensure safe and reliable operation of the Model XGS868i Ultrasonic Flow Transmitter, the system must be installed
in accordance with the guidelines established by Panametrics engineers. Those guidelines, which are explained in
detail in this chapter, include the following specific topics:
•
Unpacking the Model XGS868i system
•
Selecting suitable sites for the electronics enclosure and the flowcell/transducers
•
Installing the flowcell/transducers
Note:
See the enclosed Transducer Installation Guide for detailed instructions on transducer installation.
•
Installing optional temperature and pressure transmitters
•
Installing the electronics enclosure
•
Wiring the electronics enclosure
WARNING!
The Model XGS868i flow transmitter can measure the flow rate of many gases, some of which are
potentially hazardous. In such cases, the importance of proper safety practices cannot be
overemphasized.
Be sure to follow all applicable local safety codes and regulations for installing electrical equipment
and working with hazardous gases or flow conditions. Consult company safety personnel or local
safety authorities to verify the safety of any procedure or practice.
WARNING!
To meet CE Mark requirements, all cables must be installed as described in
Appendix A,
CE Mark Compliance
.
1.2
Unpacking
Carefully remove the electronics enclosure, the transducers, and the cables from the shipping containers. Before
discarding any of the packing materials, account for all components and documentation listed on the packing slip.
The discarding of an important item along with the packing materials is all too common. If anything is missing or
damaged, contact the factory immediately for assistance.
Summary of Contents for DigitalFlow XGS868i
