Panametrics DigitalFlow XGS868i, Startup Manual

Page: 59 / 86

DigitalFlow™ XGS868i Startup Guide 51
Chapter 3. Operation
3.4.3.2 Displaying Multiple Text Windows
The procedures for displaying one or more process parameters in a single Text Display window may be repeated to
open multiple Text Display windows. To do so, proceed as follows:
1. To open another
Text Display window and display the desired process parameter(s) in the new window, repeat
the steps in
PanaView Display.
2. Arrange the multiple Text Display windows as desired via the Window menu (see the PanaView User’s Manual).
3.4.4 Pausing Measurement
On occasion, it might become necessary for the XGS868i to stop taking measurements. Through PanaView, you can
direct the XGS868i to pause measurements without cutting off power from the meter.
1. From the meter tree in the
New Meter Browser, click on the XGS868i entry.
2. Expand the Edit Functions option, and double-click on the Pause Measurement entry. A window opens similar to
Figure 21.
Figure 21: The Pause Measurement Window
3. To pause current measurements, double-click on the
Stop measurement option. The window closes, and the
XGS868i stops taking measurements.
4. To restart measurement, double-click on the Pause Measurement entry, and then on the Measure flow option.
The XGS868i resumes flow measurement.
3.4.4.1 Procedure Options
The Startup Guide is intended to provide only those instructions necessary to get the XGS868i installed and
operating. By following the instructions in this chapter, the Model XGS868i can be set up to display the desired
channel option and the desired measurement parameter, using either the LCD display or PanaView.
To utilize the more advanced capabilities of the Model XGS868i, refer to the
Programming Manual and/or the Service
Manual for the instrument. Also, refer to the PanaView™ User’s Manual for instructions on using the PanaView
software with the XGS868i.