Panametrics DigitalFlow GC868, Programming Manual, Page: 56 / 134

Chapter 2. Displaying Data
2-11 DigitalFlow™ GC868 Programming Manual (2-Channel)
2.8 Activating Sleep
Mode
During times when the display is not in use, use the SLEEP submenu to temporarily
suspend LCD display activity, which allows the Model GC868 to process data more
quickly. Press the appropriate side of the [SCREEN] key to activate the desired pane
of the display screen, then proceed as follows:
Note: For this discussion, it is assumed that the left pane of the display screen is
active. If the right pane is active, replace the
[F1]-[F4]
keys designations by
the [F5]-[F8] keys.
1. To access the
Display Menu
, press the [DISP] key.
2. Press [
→
] and [F3] = SLEEP . The message “LCD SLEEP MODE -Press any key. . .”
appears.
3. To reactivate the display and return to the previous data screen, press any key
on the keypad. The Model GC868 will automatically return to the previous data
display screen.
Note:
With
BIG
as the selected display format, exiting
SLEEP
mode may not erase
the sleep mode message and the data screen will be superimposed on the
message. If this occurs, simply enter the
DISP
menu and reselect the
BIG
format to refresh the screen. See the instructions earlier in this chapter.