Panametrics DigitalFlow GC868, Programming Manual, Page: 101 / 134

DigitalFlow™ GC868 Programming Manual (2-Channel) B-2
Appendix B. Data Records
B.2 Initial Setup
Data
After the Model GC868 flowmeter has been installed, some initial setup data must be
entered via the
User Program
, prior to operation. Record that information in
Table B-2 below.
Table B-2: Initial Setup Data
General Information
Model # Reference
Software Vers. Date
Serial #
Measurement Method (CH1/CH2-ACTIV)
Channel 1 Channel 2
Channel Status Off Burst Channel Status Off Burst
Measure Mode Skan S/M Measure Mode Skan S/M
Channel Parameters (CH1/CH2-SYSTEM)
Channel 1 Channel 2
Channel Label Channel Label
Channel Message Channel Message
Gas Equation Standard Actual Gas Equation Standard Actual
Supercompress? Supercompress?
Vol. Units Vol. Units
Vol. Time Units Vol. Time Units
Vol. Dec. Digits Vol. Dec. Digits
Totalizer Units Totalizer Units
Tot. Dec. Digits Tot. Dec. Digits
If Mass Flow = YES If Mass Flow = YES
Mass Flow Mass Flow
Mass Flow Time Mass Flow Time
MDOT Dec. Dig. MDOT Dec. Dig.
Mass (TOT.) Mass (TOT.)
Mass Dec. Dig. Mass Dec. Dig.
System Parameters (GLOBL)
System Units English Metric If Static Density? = YES
Pressure Units Mass Flow
Stopwatch Total. Auto Manual Mass Flow Time
Vol. Units MDOT Dec. Dig.
Vol. Time Units Mass (TOT.)
Vol. Dec. Digits Mass Dec. Dig.
Totalizer Units
COMM
Submenu
Tot. Dec. Digits Password
ERROR
Submenu Baud Rate
Error Handling UART Bits
2-Path Error NO YES Network ID