PAMI Hemming Machine 99, Instructions For Use And Maintenance Manual

Page: 14 / 34

Taglio iniziale Taglio finale
OK
1
13
➙
ADJUSTING THE CUTTER
(fig. 1)
- Press keys and on the control panel simultaneously;
- The message appears on the display;
- Keep keys pressed until the message changes and reads (stitch number setting for
Final Cutter Count);
- Use keys and to enter the number of stitches
required, from the fabric start photocell reading.
- Press key and wait for the following message to
appear: at (stitch number setting for Initial
Cutter Count);
- Use keys and to enter the number of stitches
required, from the fabric end photocell reading.
- Press keys simultaneously to quit.
ADJUSTING THE LABEL POSITION
When using the label insertion unit, it is possible to adjust its position as follows:
- Press keys on the control panel simultaneously;
- The message appears on the display;
- Keep both key pressed until the message changes and reads ;
- Press key until the message appears;
- Use key to change the units;
- Use key to change the tens;
- Enter the number of stitches requires to adjust the position of the label;
- Press keys simultaneously to quit.
"
!
"
"
P - S
KSM of
D
+
-
B
+
-
D
+
-
C
+
-
!
"
!
"
B
+
-
B
+
-
P - F
!
"
"
C
+
-
D
+
-
C
+
-
D
+
-
C o A. - -
C o C. - -
K 11
Final cutter Initial cutter