Pamex Kapture KA-WR1N, User Manual & Implementation Manual

Page: 48 / 129

47
Implementation Guide
Concepts
Depending on the progress of your project, there are three phases defined as :
● Construction Phase :
All the door locks are installed but not programmed yet. MF-Admin
server is not necessary in this phase.
●
Lock Registration Phase :
The door locks are ready to be programmed/registered to MF-Admin
server.
●
Go-Live Phase :
All the locks are registered to MF-Admin Server. The system is ready
to go.
Normally, as time goes by, a project will first in construction phase, then go to lock
registration phase, then go-live phase. Each phase requires different tasks to be
completed as described below.
In this guide, we will use the term Card or Key from time to time. Both term refers to the
Mifare Card or Mifare key fob in issued by Pamex Kapture solution.
MP100 is the only device you use to issue card/key. Note that sometimes you have to
re-place (take card off the reader then place the card on the reader again) the card on
the reader to successfully complete your card operation. MF-Admin server will remind
you to re-place the card as possible as it can. But remember to do so when you
encounter MP100 reader error. It’s not a bug but the nature of Mifare Card operations.