12
AUTOMATIC ECONOMY OPERATION
The economy operation allows the heater to heat the room to the set temperature and after a period of
30 minutes it allows the temperature to automatically reduce by one degree. After another 30 minutes
the temperature is reduced by a further one degree to a maximum of two degrees.
This subtle reduction in temperature is not noticed by the user.
ROOM TEMPERTATURE ADJUSTMENT
When the heater is operational the display screen will show the [SET] temperature and The [ROOM]
temperature:
[SET] indicates your desired temperature and [ROOM] indicates current room temperature.
You can pre-set the [SET} temperature by raising or lowering the temperature selection buttons. For Eg;
Select 22 Degrees C as your desired temperature and this temperature is then memorised into the
control system.
[SET] temperature selection can range from 16 Degrees C (low)
– 26 Degrees C (high).
[ROOM] temperature is indicated as follows:
o
{L}
– lower than 0 Degrees C
o
{1}
– {30} Degrees C
o
{H}
– Higher than 31 Degrees C
Important Information:
Please assume the Room temperature is not an exact temperature.
Your room may not arrive at the [SET] temperature or may exceed the [SET] due to the size of room,
construction of room, location of the heater or external temperature. If this occurs please switch heater
OFF and then ON again. In the case of immediate re-operation the [ROOM] temperature shown on the
display screen may be higher than the actual [ROOM] temperature for at least 3 to 4 minutes.
Please note for the heater to ignite the [SET] temperature must be higher than the [
„ROOM] temperature.
