17
SETTING THE CLOCK
When the unit is first plugged in and switched on at the power point the digital display will show flashing bars
indicating that the time is required to be set. The appliance will operate without the time being set however
timer function(s) will not operate. Set or change the time as follows:
Press and release the
ON/OFF
button.
ON/OFF
Light glows
The Set temp and Room temp are displayed on
the screen.
Press and release
SET TIMES
button
12.00PM (or a previously entered time) will appear
on the digital display.
Adjust the time
To adjust the time of day press the
▼
down or
▲
up button until the correct time is reached.
[Example] To set clock for 11:12am
(1) Adjust the hour.
Keep pressing the adjustment button until
11.00am is displayed.
(2) Adjust the minute.
Press the adjustment button again until
11:12am is displayed.
Press and release the
SET TIMES
button five times to
accept the setting.
The screen goes back to Set temperature and
Room temperature mode.
Press
ON/OFF
button to exit clock setting mode.
ON/OFF
Light goes out.
Clock will be shown on the screen.
Important Information:
If the heater is unplugged or if there is a power failure please reset the clock.
1
2
3
4
5
