15
AUTOMATIC ECONOMY OPERATION
The
ECONOMY
mode is automatically operated and designed to increase efficiency of the appliance.
The
ECONOMY
operation allows the heater to heat the room to the set temperature and after a period of
30 minutes it allows the temperature to automatically reduce by one degree. After another 30 minutes
the temperature is reduced by a further one degree to a maximum of two degrees.
This subtle reduction in temperature is not noticed by the user.
ROOM TEMPERTATURE ADJUSTMENT
When the heater is operational the display screen will show the [
SET
] temperature and the [
ROOM
]
temperature:
[
SET
] indicates your desired temperature and [
ROOM
] indicates current room temperature.
You can pre-set the [
SET
] temperature by raising or lowering the temperature selection buttons. For Eg;
Select 22 Degrees C as your desired temperature and this temperature is then memorised into the
control system.
[
SET
] temperature selection can range from 16 Degrees C (low) – 26 Degrees C (high).
[
ROOM
] temperature is indicated as follows:
o
{L} – lower than 0 Degrees C
o
{1} – {30} Degrees C
o
{H} – Higher than 31 Degrees C
Important Information:
Please assume the
ROOM
temperature is not an exact temperature.
Your room may not arrive at the [
SET
] temperature or may exceed the [
SET
] temperature due to the size
of room, construction of room, location of the heater or external temperature. If this occurs please switch
heater OFF and then ON again. In the case of immediate re-operation the [
ROOM
] temperature shown
on the display screen may be higher than the actual [
ROOM
] temperature for at least 3 to 4 minutes.
