Palmgren TU 2506, Operating Manual

Page: 55 / 98

Page 55
TU2506
ǀ
TU2807V US
Start of work
after every
maintenance
and repair
operation
Fee
d
gea
r
Visual inspection

Check the oil level in the gear's inspection glass. It must
reach at least the centre of the inspection glass.

If necessary, fill up to the reference mark with Mobilgear
627 or equivalent oil.
Fig.5-2: Oil inspection glass of the feed gear
First after 200
hours in ser-
vice, then after
every year
Fe
ed ge
ar
Oil change

Use an adequate collector vessel with sufficient capacity
for the oil change.

Unscrew the bolt of the outlet.

Unscrew the bolt of the charging hole.

Close the outlet when no more oil is running off.

Refill with Mobilgear 627 or an equivalent oil up to the ref-
erence mark in the centre of the inspection glass using a
suitable funnel in the filling hole.
Fig.5-3: Gear openings
Interval Where? What? How?
Reference mark sight glass
Outlet
Charging hole