Palmgren TU 2506, Operating Manual

Page: 32 / 98

Page 32
TU2506
ǀ
TU2807V US
4 Operation
4.1 Safety
Use the lathe only under the following conditions:

The lathe is in proper working order.

The lathe is used as prescribed.

The operating manual is followed.

All safety devices are installed and activated.
All Troubleshooting should be eliminated immediately. Stop the machine immediately in the
event of any abnormality in operation and make sure it cannot be started up accidentally or
without authorisation.
Notify the person responsible immediately of any modification.

"Safety during operation“ on page 14
4.2 General working advice - coolant
Friction during the cutting process causes high temperatures at the cutting edge of the tool.
The tool should therefore be cooled during the cutting process. Cooling the tool with a suitable
cooling lubricant ensures better working results and a longer edge life of the cutting tool.
INFORMATION
Use a water-soluble and non-pollutant emulsion as a cooling agent. This can be acquired from
authorized distributors.
Make sure that the cooling agent is properly retrieved. Respect the environment when dispos-
ing of any lubricants and cooling agents. Follow the manufacturer's disposal instructions.