Chapter 2
Setting Up a Phone Connection
8
6.
Enter a passkey for this connection on your phone, and then tap OK.
A passkey is a unique identifier that enables secure data exchange between two
devices enabled with Bluetooth technology that have formed a connection with
one another. The passkey is stored on both devices. If Phone Link is unable to
validate the same passkey on both your handheld and your phone, an error
message appears and you are given the option to try connecting again. If you
need additional information about connecting your phone, consult your phone
documentation or your Bluetooth accessory documentation.
7.
When prompted to create a trusted connection, tap Next.
8.
Enter a passkey for this connection on your handheld, and then tap OK.
9.
When the Confirmation dialog box appears, tap Yes.
IMPORTANT
If you tap No in the Confirmation dialog box, the link between your
phone and handheld will not work.
10.
Tap Done.
The Network Service dialog box appears.
11.
Tap Yes, and then follow the instructions in the next section to set up network
services for your phone.
Tap Next
Tap Yes
Summary of Contents for Phone Link Handbook
Page 1: ...Phone Link Handbook...
Page 4: ...Contents iv...
Page 8: ...Chapter 1 Using Phone Link 4...
