![background image](http://html.mh-extra.com/html/pallmann/cobra-ii/cobra-ii_operating-instructions-manual_748106007.webp)
Pallmann Cobra II Manual
7
3.2
Technical data
Single-phase AC motor ............................................................240V, 60 HZ
Motor capacity ....................................................................3,68 kW (5,0HP)
Sanding drum speed .................................................................... 2550 rpm
Sanding width ..................................................................................... 7-7/8”
Sanding belt dimensions ................................................. 7-7/8’’ x 29-1/2’’
Total machine weight ........................................................................212 lbs
3.3
Safety and machine protection
Cobra II is equipped with an
- overcurrent cutout
- no-volt release
The overcurrent cutout protects the machine and operator from danger in case of
short circuits or power surges into the machine.
The no-volt release prevents uncontrolled restart of the machine after power
failure. The motor will
not
start automatically when the power returns; it will have to
be switched on again.
4.0
Proper use
The Cobra II wood floor sander is suitable for dry sanding of wood floors. No other
use is recommended.
Caution!
Never use Cobra II for wet procedures (fatal risk from electric shock)!