![background image](http://html.mh-extra.com/html/pallmann/cobra-ii/cobra-ii_operating-instructions-manual_748106020.webp)
Pallmann
Cobra
II
Manual
20
7.4
Replacing the abrasive belt
Caution! Risk of injury if the machine starts unintentionally!
When replacing the abrasive belt, there is a risk of starting the machine unintentionally.
Unplug the machine from the main power supply before working on the abrasive belt.
Caution! Risk of cutting your hands!
The sanding grains of the abrasive belt have sharp edges. Always wear safety gloves
when replacing the abrasive belt.
How to replace the abrasive belt:
1. Switch off the machine.
2. Unplug the power cord from the main power supply.
3. Open the access door ( 1 ) and the hood ( 2 ).
4. Pull the tension lever (3) towards the front of the machine. The abrasive belt (4) will
be released from the sanding drum. Pull the abrasive belt out to the side.
5. Insert a new abrasive belt.
6. Push the tension lever (3) back to tighten the abrasive belt to the sanding drum.
7. Close the access door ( 1 ) and the hood ( 2 ).
3
COBRA CLASSIC #74540
09/2014
Contents
1
Introduction .....................................................................................................................................................................
4
2
Scope of delivery ............................................................................................................................................................
5
3
Machine specifications COBRA CLASSIC ...................................................................................................................
6
3.1
Important components ......................................................................................................................................................
6
3.2
Technical data ..................................................................................................................................................................
7
3.3
Safety and machine protection facilities............................................................................................................................
7
4
Proper use .......................................................................................................................................................................
7
5
Assembly of the machine...............................................................................................................................................
8
5.1
Installing the guide tube ...................................................................................................................................................
8
5.2
Installing the motor ...........................................................................................................................................................
8
6
Disassembling for transport .........................................................................................................................................
9
6.1
Removing the guide tube ................................................................................................................................................
9
6.2
Removing the motor..........................................................................................................................................................
10
7
Operating the COBRA CLASSIC ..................................................................................................................................
11
7.1
Protective clothing and equipment ..................................................................................................................................
11
7.2
Fitting the dust bag ........................................................................................................................................................
11
7.3
Safety instructions regarding dust ....................................................................................................................................
12
7.4
Disposing of sanding dust ...............................................................................................................................................
12
7.5
Replacing the sanding belt ..............................................................................................................................................
13
7.6
Adjusting the sanding pressure .......................................................................................................................................
14
7.7
Safety instructions for electric cable and connectors ......................................................................................................
14
7.8
Connecting the COBRA CLASSIC to the mains power ..................................................................................................
15
7.9
Remarks about sanding parquet and plank floors ..........................................................................................................
16
7.10
Sanding with the COBRA CLASSIC ...............................................................................................................................
19
8
Maintenance ...................................................................................................................................................................
24
8.1
Changing the sanding drum ............................................................................................................................................
24
8.2
Adjusting the running wheels ..........................................................................................................................................
26
8.3
Adjusting the castor wheels ............................................................................................................................................
27
8.4
Adjusting the tension roller ...............................................................................................................................................
28
8.5
Changing the belt ..............................................................................................................................................................
29
8.6
Checking dust extraction .................................................................................................................................................
30
8.7
Switching off and storing the machine ............................................................................................................................
30
9
Declaration of conformity ..............................................................................................................................................
31
10
Warranty...........................................................................................................................................................................
32