4
Figure 1
Base module and extension modules
Table 1
General hardware assembly overview
Item
Part number
Dimensions
Weight
Base Stand
LGR3000STAND
1066 mm x 1260 mm x 600 mm high
70 Kg
Base Module
LGR3000BASE
1066 mm x 1260 mm x 1406 mm high
230 Kg
Extension Module
LGR3000EXT
1066 mm x 1260 mm x 1000 mm high
160 Kg
Lifting Hoist
LGR3000HOIST
405 mm x 225 mm high
10 Kg
4.1
Preparation and installation of the Allegro base and extension module
To prepare the tote for use:
1. Check that the area designated for use is clear and can accommodate the hardware system
being installed. Ensure that the surface area is flat, level, and strong enough to bear the
weight of the tote when full. If required, prepare studs for screwing the feet down. Please
refer to Table 1 for clearance.
2. Using a forklift, position the stand on the level area intended for use (Figure 2).
Figure 2
Hardware stand
Biocontainer Lifting Hoist
3000 L Extension Module
2000 L Extension Module
Base Module 1000 L
Base stand
