ILU 40/50 Owner
’s Manual
Revision 1.5
18
5.4
Decal Placement and Inspection
For operator’s safety, all decals appearing in “Decal Kit” must be in a conspicuous place on control
side of liftgate to be read by operator. This is typically a combination of decals on the liftgate and
truck body. Please make sure to place the maximum capacity decal (D) on driver and curb side.
(A) 1 ATG-URGWA - Urgent warning: Elevating gate instructions
(B) 1 ATG ILU - Operational Instructions (placed on your Control Box).
(C) 1 ATG-FT - Notice for Foot Control (if applicable)
(D) 2 ATG-XXXX - Max. Capacity (please check the serial number plate to find out your specific capacity)
(E) 1 ATG-CAB - Liftgate Shut-Off (must be placed next to the Shut-Off Switch)
(F) 2 ATG-WLH - Warning: liftgate can crush
(G) 2 ATG-CTN - Caution: Always stand clear of platform area
(H) 1 ATG-BKR - Circuit Breaker Reset (must be located at the circuit breaker)
(J) 1 ATG-RESET - Circuit Breaker Protection
(K) 1 ATG-UD - Toggle Decal
(L) 1 ATG-WNG - Warning: Use handle to open (must be located underneath handle (main section))
Decal - A
Decal - C
Decal - D
Decal - H
Decal - B
Decal - F
Decal - G
Decal - J
Decal - E
Decal - K
Decal - L
