ILU 40/50 Owner
’s Manual
Revision 1.5
11
4.3
Operation by Foot Control
DOWN:
Step on switch 1 and hold
– wait between one and
three seconds before you step on switch 2.
For auto tilt, stay on the switches till platform starts tilting.
UP:
Step on switch 2 and hold
– wait between one and three
seconds before you step on switch 1.
The platform will tilt up to preset position before raising.
IF BOTH SWITCHES ARE NOT ACTIVATED
WITHIN THREE SECONDS, START OVER.
4.4
Operation by Wireless hand Held Remote (optional)
6-Way Wireless Remote (Optional)
1. Power the remote control unit using the ON/OFF switch located on the rear side of the control
2. Reference illustration below for gate operation.
Tilt Down
Tilt platform down
Down
Lower platform
Up
Raise platform
Tilt Up
Tilt platform up
Slide In (B)
Slide platform in to
stored position
Slide Out (A)
Slide platform
out from
stored position
1
2
