ILP 25/33 Installation Manual
Rev. 1.4
- 54 -
13.8
2-Button Hand Held Remote Control (Optional)
2-Button
Hand Held Remote
Hand Held Remote
Holster
Mounting Screws
1.
Mount the holster approximately 40”- 48” from the floor, or determine the best location as preferred
by end user,
Fig.46
.
2. Route the cable from the liftgate up through the inside corner post or between the wall extrusions of
the truck. Use the wire clamp to secure the incoming cable,
Fig.47
.
3. Splice the cables from the liftgate to the hand held remote with butt connectors and seal each
connection with heat shrink.
Secure liftgate wire
with wire clamp at
entry point
Be
d E
xte
ns
ion
Flo
or
Sil
l
C
o
rn
e
r
P
o
st
Function
To
Wires From
Gate/Number
Up
Down
12V (Hot)
5 / Red
6 / Yellow
4 / Green
Wiring Table
Be
d E
xte
ns
ion
Flo
or
Sil
l
Solenoid
Release Valve
ON/OFF Switch
Fig.46
Fig.47
